The Power of Single Pair Ethernet

online, on-demand

Transformative Technology for Seamless Connectivity

Join us on the journey to the revolution of Ethernet communication with Single Pair Ethernet. Avnet Silica, together with our partners, will provide you insides on SPE solutions and implementations.

Single Pair Ethernet (SPE) is a milestone of the Ethernet technology, suitable for industrial automation, process automation, building automation, transportation, agriculture vehicles, automotive and other markets and will enable new applications. With SPE a homogeneous Ethernet network architecture from the sensor to the cloud can be realised, and with just one twisted pair, the cabling will be easier and lower cost too.

This webinar covers in multiple session topics around SPE technology, its advantages, use cases and applications as well as implementation solutions. The attendees will have the opportunity to engage with industry leaders during the live Q&A sessions.

Watch on-demand

Partners

Agenda

Registration

Topics

Use cases and market potential of Single Pair Ethernet in the industry by SPE System Alliance

Speakers

Simon Seereiner
Director of the Board SPE System Alliance, Business Development Manager SPE, Weidmüller
SPE System Alliance

Thomas Keller
Product Manager Interconnect Rosenberger, Board Member SPE System Alliance
SPE System Alliance

March 26, 2024 - 09:35 CET

Single Pair Ethernet (SPE) is on the rise. Digital data is changing our lives and our networked production processes. The key is fast and compact access to information, as well as end-to-end communication from the sensor to the cloud. In factory automation alone, experts expect 50 million single-pair Ethernet connection points by 2030, which is precisely where SPE offers numerous new possibilities in PROFINET applications.

Modern automation systems use Ethernet-based communication at the control level. At the sensor/actuator level, communication mainly takes place with various fieldbus systems. Transferring data from a fieldbus-based system to Ethernet poses technical hurdles and avoidable data transfer costs. SPE offers a standardised key technology for the implementation of compact, digital sensor systems.

Connectivity for APL & SPE by Weidmüller

Speakers

Torben Schoeneberg
Product Manager Device Connectivity
Weidmüller

Klaus Leuchs
Product Manager Industrial Ethernet Passive Components
Weidmüller

March 26, 2024 - 10:20 CET

In this presentation we’ll give a short introduction to Weidmüller’s solution for Ethernet-APL and Single Pair Ethernet. We’ll get to know technical aspects and applications across industries including faced challenges and the customer-centric solutions that make Ethernet based on two wires a game-changer.

Discover how Weidmüller contributes to this revolution with a tailored offer, including an overview of our portfolio and solutions for APL and SPE.  

Extended cable reach and node count on 10BASE-T1S multidrop systems by Microchip

Speakers

Matthias Karcher​
Associate Director Marketing Wired Networking
Microchip

March 26, 2024 - 10:50 CET

When the 10BASE-T1S specifications were written, automakers wanted to document the minimum number of nodes and cable reach that they needed. Therefore, minimums were included along with a description of the channel. These minimums are greatly exceeded by current silicon implementations. This presentation will give an overview of the channel requirements along with simulations and measurements of various configurations.  It will also show a demonstrator connecting 50 nodes over 100m of cabling. 

Applications of Single Pair Ethernet by SPE Industrial Partner Network

Speakers

Cornelia Eitel
Senior System Architect, CTO Office Industrial Automation Solutions
SPE Industrial Partner Network, Belden, Inc

Matthias Fritsche
Senior Expert Ethernet Connectivity
SPE Industrial Partner Network e.V. / HARTING Electronics GmbH

March 27, 2024 - 09:35 CET

Single Pair Ethernet, originating in the automotive sector, addresses critical factors like weight and installation space. As cars electrify, Electric Range (WLTP) becomes crucial. Autonomy demands a communication standard with synchronization, low latency, and higher bandwidths, aiming to replace existing bus systems cost-effectively.

Beyond automotive, various applications require increased bandwidth and network functionalities. This presentation explores the vast potential of SPE outside the automotive industry, focusing on essential considerations for transmission speed and power supply design.

Lessons learned from the application of 10BASE-T1L SPE in demanding applications by ZHAW

Speakers

Dr. Martin Ostertag
Senior Lecturer
ZHAW Zurich University of Applied Sciences

Kilian Brunner
Research Associate
ZHAW Zurich University of Applied Sciences

March 27, 2024 - 10:20 CET

10BASE-T1L is entering the market for Process and Building Automation applications. With its link speed of 10 Mbit/s and the support for Power over Data Lines, it is ideally positioned to success the conventional field bus systems. 

We went a step further and investigated the properties of the technology for demanding application such as distributed sensor systems with high time accuracy requirements, and nonstationary installations in mechanically harsh environments. The presentation is about our findings and the recommendations we derive from these. 10BASE-T1L is a very useful technology, but system designers should be aware of these limitations.

NXP Single Pair Ethernet – Opening new possibilities for multidrop networking by NXP

Speakers

Mauro Vignali​
EMEA Distribution Marketing Manager
NXP Semiconductors

March 27, 2024 - 11:05 CET

Global Automotive and Industrial megatrends are driving new requirements for the Ethernet communication. This session will review the Ethernet challenges in the next decade and present how NXP will support the changes.

Watch on-demand