STMicroelectronics ST4E1240 & ST4E1216
ST4E1240 & ST4E1216 - High-speed 3.3 V / 5 V RS485 transceiver with ± 12 kV IEC 61000-4-2 contact ESD protection
The ST4E1216 and ST4E1240 are low-power differential line transceivers for data transmission standard RS485 applications in half-duplex mode, compatible with either 3.3 V or 5 V rail power supplies, fully operating from 3 V to 5.5 V.
The ST4E1216 and the ST4E1240 operate respectively up to 16 Mbps and 40 Mbps. They are ideal for multipoint applications over extended cable runs. They are robust to ESD transients. In particular, the bus pins support ±12 kV IEC 61000-4-2 contact discharge. They also feature robust hot-swap capability during switching on and off, or during hot insertion.
The ST4E1216 and ST4E1240 are available in the standard SO-8 package and operate respectively with a -40 °C to 125 °C and -40 °C to 85 °C temperature range.
Features
- Meets or exceeds TIA/EIA-485A standard requirements
- 3 V to 5.5 V supply voltage
- Differential output voltage (VOD) exceeds 2.1 V at 5 V supply for PROFIBUS compatibility
- High speed: up to 40 Mbps data rate
- More than 64 transceivers on the bus (up to 100 nodes)
- Integrated protections
- Fail-safe receiver (bus open, idle, and shorted)
- Thermal shutdown protection
- Hot-swap capability (with parasitic capacitance up to 100 pF)
- Bus I/O ESD protection±12 kV IEC61000-4-2 contact discharge≥ ±8 kV HBM ESD±4 kV IEC61000-4-4 class-A fast transient burst (EFT)
- Low quiescent current in shutdown mode
- Available in industry standard SO-8
Applications
- Factory automation and control
- Motion controllers
- Building automation and safety
- Video surveillance (building, traffic monitoring)
- Backplane busses
- Grid infrastructure
- Data acquisition (smart meters, seismic networks)
silica content library/npi/2024/stmicroelectronics-st4e1240
STMicroelectronics ST4E1240 & ST4E1216 High-speed RS485 transceivers | Avnet Silica
