Reference Design Details

Design Hub

Search Reference Designs

STM32 16-Channel LED Driver based on STMicroelectronics LED1642GW Expansion Board

The X-NUCLEO-LED16A1 is an STM32 Nucleo expansion board designed to provide an application for the 16 channel LED driver LED1642GW. Depending upon the end application, RGB or single color LEDs can be connected to the board. Separate brightness control is possible for each channel. The LED1642GW is a monolithic, low voltage, low current power 16-bit shift register designed for LED panel displays. The LED1642GW guarantees 20 V output driving capability allowing the user to connect several LEDs in series. In the output stage, sixteen regulated current sources provide from 3 mA to 40 mA constant current to drive the LEDs. The current is programmed through an external resistor and can be adjusted by a 7-bit current gain register in two subranges.
CATEGORY
Home & building,Industrial
REFERENCE DESIGN
Modify with AVAIL
PARTS IN DESIGN / BOM BY STORE

The displayed part lists is a small subset of the complete BOM.


MFGR PART# BLK NM
Avnet Abacus logo
If you are not a customer of Avnet , please Register Here for Design Hub to interact with the AVAIL design tool and view BOM lists.

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY.  SEE LEGAL NOTICES | AVNET EMEA FOR ADDITIONAL INFORMATION.

 
RELATED DESIGNS
Reference Design Block Diagram of Marvell Armada 88F, 7K-8K, XP Series Power Rails based on TDK uPOL Power Module Solution
Marvell Armada 88F, 7K-8K, XP Series Power Rails based on TDK uPOL Power Module Solution
Marvell Armada multi-core ARM SoCs (88F, 7K/8K, XP Series) power rails based on TDK uPOL Power Module Solution.
View Design
Reference Design Block Diagram of 3 Phase Fast DC EV Charging Station based on Vishay Solutions
3 Phase Fast DC EV Charging Station based on Vishay Solutions
3 Phase Fast DC EV Charging grid infrastructure solution for industrial segment charging stations
View Design
Reference Design Block Diagram of MaaXBoard RT (NXP i.MX RT1176)
MaaXBoard RT (NXP i.MX RT1176)
The MaaXBoard RT is a dual-purpose SBC board based on NXP's i.MX RT1176 processor.
View Design
Reference Design Block Diagram of NavQPlus AI/ML Companion Computer EVK for Robotics, Ground Stations and Camera Heads based on NXP
NavQPlus AI/ML Companion Computer EVK for Robotics, Ground Stations and Camera Heads based on NXP
Reference designbased on NXPs Technology for a mission computer (companion computer), for use in mobile robotics using ROS2 and similar applications such as ground stations and smart cameras.
View Design
Reference Design Block Diagram of Smart Battery Management for Mobile Robotics based on NXP
Smart Battery Management for Mobile Robotics based on NXP
Reference design of the NXPs RDDRONE-BMS772 is a standalone BMS reference design suitable for mobile robotics such as drones and rovers, supporting 3 to 6 cell batteries
View Design
Reference Design Block Diagram of i.MX RT Industrial Drive Development Platform based on NXP Solutions
i.MX RT Industrial Drive Development Platform based on NXP Solutions
Reference Design for a single i.MX RT1176 Crossover MCU controling 4 different motors while managing connectivity and HMI interface based on NXP
View Design
Reference Design Block Diagram of AC & Variable Frequency Driven (VFD) Motor based on NXP Solution
AC & Variable Frequency Driven (VFD) Motor based on NXP Solution
Reference Design of Variable Frequency and AC Motor Drive Solution based on NXP
View Design
Reference Design Block Diagram of Motion Control and Robotics based on NXP Solution
Motion Control and Robotics based on NXP Solution
Reference Design for compact multi-axis motion control all the way up to high-performance robotics applications.
View Design
Reference Design Block Diagram of Portable Brushed DC Motor Control based on NXP Solution
Portable Brushed DC Motor Control based on NXP Solution
Reference Design of a Portable Brushed DC Motor based on NXP Solution
View Design
Reference Design Block Diagram of Brushless DC Motor (BLDC) Control based on NXP Solution
Brushless DC Motor (BLDC) Control based on NXP Solution
Reference Design of a Brushless DC Motor (BLDC) Control Solution based on NXP
View Design
Reference Design Block Diagram of Vineyard Pest Monitoring System based on Arduino Solution
Vineyard Pest Monitoring System based on Arduino Solution
This system utilizes LoRa technology to enable remote monitoring of pest in vineyards. Arduino Pro allows farmers to monitor their activity with pheromone traps and collect the data remotely.
View Design
Reference Design Block Diagram of Home Automation based on Arduino Solution
Home Automation based on Arduino Solution
The home automation systems allow to control electronic devices remotely and to perform automatic routines based on the user's programming preferences, also optimizing energy costs.
View Design
 
RELATED ARTICLES
IPE OFF-Board Connectors - The Backbone of Modern Manufacturing
February 9, 2024
IPE OFF-board connectors are vital for seamless communication in industrial automation, driving efficiency, safety, and innovation in modern manufacturing.
Read More
How IPE OFF-Board Products are key to the Renewables Revolution
February 9, 2024
Renewable energy's surge demands reliable IPE OFF-board products like connectors and bus bars for seamless integration and efficient power transmission.
Read More
Enabling reliable, efficient EV Charging with OFF-Board Components
February 9, 2024
To accelerate the EV transition, reliable and efficient charging infrastructure is crucial. IPE OFF-board products play a vital role in meeting this need.
Read More
Fibre optics - the hidden enabler of our daily lives
August 3, 2023
Fibre optic systems are well-known for their role within the telecommunications industry.
Read More
Key trends across the development of MedTech devices
June 9, 2023
The healthcare industry is facing a unique combination of challenges over the coming decades.
Read More
What are the most common fiber optics problems?
May 5, 2023
Fiber optic communication uses pulses of light to transmit data along thin strands of glass or plastic.
Read More
Why should you consider a smart monitoring system for your diesel generator?
By Philip Ling   -   March 10, 2023
The IoT is changing the way we manage and maintain essential assets. Smart sensors, cloud-based analytics and remote management are coming together to increase productivity, efficiency and reliability.
Read More
Specifying effective components to meet the needs of industrial & building automation
March 15, 2022
The way that industrial locations are run is currently going through a step-change, with greater use of automation being a top priority for many companies. Thanks to this, production output may be boosted and efficiency levels increased.
Read More
What does miniaturisation mean for connector selection?
By Paul Jones   -   February 9, 2022
As electronic systems become smaller, they also require more component parts in increasingly space-constrained environments to meet extra expectations on functionality. Here Paul Jones explores what they means for connector selection across markets.
Read More
The robots are coming
By Hagen Goetze   -   January 25, 2022
Industrial robots can be enormously effective for automating high-value, repetitive, and often unsafe processes, such as handling heavy castings or welding body seams on vehicle production lines.
Read More
How shifting to modular machine design enables Industry 4.0 strategies
By Paul Jones   -   September 22, 2021
As more and more factory and warehouse operations adopt Industry 4.0, large machinery is moving away from centralised control models to more modular machine designs. So what challenges are machine designers facing, and how can they overcome them?
Read More
From AC to DC: powering intelligent buildings
By Philip Lechner   -   September 21, 2021
There is a lot of interest in how to power the electronic and electrical devices in buildings of the future. Not just limited to energy savings, it includes how to integrate new energy sources such as solar, wind turbines and batteries.
Read More
 
RELATED EVENTS
Murata I Selecting Power Supplies for Medical Devices


Date: July 1, 2024
Location: Online, On Demand

Kyocera AVX I Uncovering the Hidden Heroes in IoT: Crystal Oscillators, Antennas, and Supercapacitors


Date: June 14, 2024
Location: Online, On Demand

PCIM Europe 2024


Date: June 11, 2024
Location: Online, On Demand

Avnet Abacus World of Electronics and Solutions - Paderborn


Date: April 29, 2025
Location: Paderborn, Germany

Panasonic Industry | Introduction to Forcibly Guided Relays and Current Applications in Industrial Automation


Date: May 13, 2024
Location: Online, On Demand

SEMCO | MLCC Key Parameters in Automotive Applications


Date: November 27, 2024
Location: Online, On Demand

Leistungsinduktivität für die Stromversorgung in Fahrerassistenzsystemen (ADAS) und Steuergeräten


Date: November 30, 2024
Location: Online, On Demand

The Automation Connectivity Toolbox: A Solutions Guide for Intelligent Industrial Systems


Date: October 31, 2023
Location: Online, On Demand

Bourns: Solutions for Smart Energies and Infrastructures


Date: October 26, 2023
Location: Online, On Demand

Yageo | Solutions for Green Energy Applications


Date: October 27, 2023
Location: Online, On Demand

Electrification and Growth Opportunity with Amphenol PCB Interconnect


Date: October 23, 2023
Location: Online, On Demand

OMRON: Applying the Right Component and Design to Achieve Efficient Distributed Energy Storage


Date: October 16, 2023
Location: Online, On Demand