Avnet Abacus is an authorised InvenSense distributor throughout Europe.
InvenSense, a TDK Group company, is a world leading provider of MEMS sensor platforms found in mobile, wearables, Smart Home, industrial, and automotive products. The company’s patented Fabrication Platform, MotionFusion® technology, audio solutions, and location software and services address the emerging need of many mass-market consumer applications via improved performance, accuracy, and intuitive motion-, gesture- and sound-based interfaces.
Founded in 2003, InvenSense is headquartered in San Jose, California and has offices in Boston, China, Taiwan, Korea, Japan, France, Canada, Slovakia and Italy.
Webinar: An introduction to motion sensor technology
Learn about the basics of motion sensor technology and how to leverage it in consumer, industrial and automotive applications.
From accurate motion control in VR gaming, to highly sophisticated safety features in automotive and industrial systems, motion sensing technology is opening up a new world of capabilities in modern applications.
Hosted by Richard Curley, Supplier Business Manager, Avnet Abacus, with a technical presentation from Vishal Markandey, Senior Technical Marketing Manager, TDK-InvenSense, this webinar will provide a technical introduction to how motion sensor technology works, with an in-depth look at use cases and system integration, TDK-InvenSense’s product offering and development tools.
WATCH ON DEMAND
TDK Invensense SmartMotion® development kits
The TDK SmartMotion platform is a comprehensive development kit for InvenSense motion sensor devices. The platform designed around a Microchip SAMG55 MCU can be used by customers for rapid evaluation and development of InvenSense sensor based solutions.
The platform integrates an on-board embedded debugger so external tools are not required to program or debug the SAMG55 MCU. The SmartMotion platform runs software including InvenSense MotionLink, a GUI based sensor evaluation tool, and the embedded motion drivers for motion sensor software development.
Learn More
New product introductions from TDK InvenSense
| Image | Product | New |
|---|---|---|
 | TDK InvenSense ICM-45686 series sensor The ICM-45686 is a high-performance dual interface (UI + AUX) 6-axis MEMS MotionTracking device. It has a configurable host interface that supports I3CSM, I2C and SPI serial communication, and an AUX interface that supports SPI slave mode for connect | |
 | TDK InvenSense ICM-45605 series sensor The ICM-45605 is a high performance 6-axis MEMS MotionTracking device. It has a configurable host interface that supports I3CSM, I2C and SPI serial communication, and an I2C master mode interface for connection to external sensors. The device feature | |
 | TDK InvenSense DK-42688P-9x and DK-42670P-9x series The DK-42688P-9x and DK-42670P-9x are two comprehensive development platforms for 9-axis motion sensing solutions. DK-42688P-9x comprises of two distinct boards in one boxed solution - DK-42688-P and daughter board DB-IST8306. This daughter board ca | |
 | TDK InvenSense ICM-42370-P 3-axis accelerometer The ICM-42370-P is a high performance MEMS MotionTracking device that has a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C, and SPI serial communication, features up to 2.25 Kbytes FIFO and 2 programmable interrup | |
 | TDK InvenSense SmartBug 2.0 wireless sensor module SmartBug 2.0 standard edition - software and algorithms. Features Sensor data: raw sensor data streaming with configurable FSR and ODRSpatial audio head tracking: use 6-axis IMU to output real time head position data (Yaw/Pitch/Roll)Air mouse: u | |
 | TDK InvenSense IIM-20670 series SmartIndustrial™ The IIM-20670 is a SmartIndustrial™ 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer in a small plastic package. By leveraging its patented and volume-proven CMOS-MEMS fabrication platform, InvenSense has drive | |
 | TDK InvenSense IIM-46234 series SmartIndustrial™ The IIM-46230 and the IIM-46234 two SmartIndustrialTM 6-axis MotionTracking devices that combine multiple 3- axis gyroscopes and 3-axis accelerometers packaged in a module that is approximately 23mm x 23mm x 8.5mm and includes a standard 20 pin conne | |
 | TDK InvenSense ICU-20201 series sensor ICU-20201 is a miniature, ultra-low power, long-range ultrasonic Time-of-Flight (ToF) transceiver. Based on Chirp’s patented MEMS technology, the ICU-20201 is a system-in package that integrates a nominally 85kHz PMUT (Piezoelectric Micromachined Ult | |
 | TDK InvenSense ICM-40627 high performance 6-axis MotionTracking™ IMU The ICM-40627 is a 6-axis MEMS motion tracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. This device is targeted at hand-held devices that require precise mouse pointing and motion control. The ICM-40627 comes bundled with T | |
 | TDK InvenSense ICP-20100 low noise, low power MEMS barometric pressure The ICP-20100 is a barometric pressure sensor based on MEMS capacitive technology, improving our lead in the development of ultra-low noise at the lowest power and progressing our industry-leading relative accuracy, sensor throughput, and temperatur | |
 | TDK InvenSense IAM-20685 6-axis MEMS gyroscope and accelerometer Taking advantage of TDK’s proprietary MEMS fabrication platform and technology, the IAM-20685 features a highly integrated single-chip 6-axis MEMS gyroscope and accelerometer combination in a small plastic package. Offering unparalleled low-power con | |
 | TDK InvenSense ICM-42688-V high precision 6-axis MEMS MotionTracking™ The ICM-42688-V is a high performance 6-axis MEMS motion tracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. This device is targeted at applications that require premium levels of sensor fusion accuracy for precise orientatio | |
 | TDK InvenSense ICP-10125 10atm pressure and temperature sensor IC The ICP-10125 pressure sensor is based on MEMS capacitive technology which provides ultra-low noise at the lowest power, enabling industry-leading relative accuracy, sensor throughput, and temperature stability. The pressure sensor can measure pressu | |
 | TDK InvenSense IIM-42351 series 3-axis SmartIndustrial™ The IIM-42351 is a 3-axis accelerometer packaged in a small 2.5mm x 3mm x 0.91mm (14-pin LGA) package. The IIM-42351 includes multiple capabilities to enable easy, robust and accurate inertial and inclination measurements in Industrial applications: | |
 | TDK InvenSense IIM-42652 series 6-axis SmartIndustrial™ The IIM-42652 is a 6-axis SmartIndustrial™ MotionTracking device that supports an extended operating temperature range. The IIM-42652 combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 2.5mm x 3mm x 0.91mm (14-pin LGA) package. It al | |
 | TDK InvenSense IIM-42352 series 3-axis SmartIndustrial™ The IIM-42352 is a 3-axis accelerometer packaged in a small 2.5mm x 3mm x 0.91mm (14-pin LGA) package. The IIM-42352 includes multiple capabilities to enable easy, robust and accurate inertial and vibration measurements in industrial applications: |
TDK InvenSense
ICM-20948 9-axis motion tracking device
The ICM-20948 is the world’s lowest power 9-axis motion tracking device that is ideally suited for wearable sensors and IoT applications.
TDK InvenSense
ICM-20602 6-axis motion sensor
The ICM-20602 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 3x3x0.75mm (16-pin LGA) package.
TDK Invensense
ICM-20648 6-axis motion sensor
The ICM-20648 a 6-axis MotionTracking device that is ideally suited for Smartphones, Tablets, Wearable Sensors, and general IoT applications.
Documents
Legal documents