TDK Invensense ICP-10125 10atm pressure and temperature sensor IC

The ICP-10125 pressure sensor is based on MEMS capacitive technology which provides ultra-low noise at the lowest power, enabling industry-leading relative accuracy, sensor throughput, and temperature stability. The pressure sensor can measure pressure differences with an accuracy of ±1Pa, an accuracy enabling altitude measurement differentials as small as 8.5 cm, less than the height of a single stair step.

Consuming only 1.3μA @1Hz, the device is available in a small footprint 3.55mm × 3.55mm × 1.45mm chimney package with waterproofing gel providing IPx8 waterproofing to 10 ATM. The ICP-10125 is ideally suited for wearable fitness monitoring and battery powered IoT.

The ICP-10125 offers an industry leading temperature coefficient offset of ±0.5Pa/ºC. The combination of high accuracy, low power, temperature stability, waterproofing in a small footprint enables higher performance barometric pressure sensing for sports activity identification and mobile indoor/outdoor navigation.

Features

• Pressure operating range: 30kPa to 110kPa
• Noise and current consumption
  • 0.4Pa @ 10.4μA (ULN mode)
  • 0.8Pa @ 5.2μA (LN mode) 
  • 3.2Pa @ 1.3μA (LP mode)
• Pressure sensor relative accuracy: ±1Pa for any 10hPa change over 950hPa to 1050hPa at +25°C
• Pressure sensor absolute accuracy: ±1hPa over 950hPa to 1050hPa, 0°C to +65°C
• Pressure sensor temperature coefficient Offset: ±0.5Pa/°C over 25°C to 45°C at 100kPa
• Temperature sensor absolute accuracy: ±0.4°C
• IPx8: waterproof to 10ATM
• Temperature operating range: -40 °C to +85 °C
• Host interface:I2C at up to 400kHz
• Single supply voltage: 1.8V ±5%
• RoHS and green compliant

Applications

• Smart watches
• Leisure, sports, and fitness activity monitoring for wearable sensors
• Altimeters and barometers for portable devices
• Indoor/outdoor navigation (dead-reckoning, floor/elevator/step detection)
• Home and building automation
• Weather forecasting