Reference Design Details

Design Hub

Search Reference Designs

STM32 Bluetooth Low Energy based on STMicroelectronics BlueNRG-M2SP Expansion Board

This design is based on the STMicroelectronics X-NUCLEO-BNRG2A1 expansion board. The X-NUCLEO-BNRG2A1 expansion board provides Bluetooth low energy connectivity for developer applications and can be plugged onto an STM32 Nucleo development board through its Arduino UNO R3 connectors. The expansion board features the Bluetooth v5.0 compliant and FCC certified BlueNRG-M2SP application processor module based on the ST BlueNRG-2 System-on-Chip. This SoC manages the complete Bluetooth low energy stack and protocols on its Cortex-M0 core and programmable Flash, which can accommodate custom applications developed using the SDK. The BlueNRG-M2SP module supports master and slave modes, increased transfer rates with data length extension (DLE), and AES-128 security encryption. The X-NUCLEO-BNRG2A1 interfaces with the STM32 Nucleo microcontroller via SPI connections and GPIO pins, some of which can be configured by the hardware.
CATEGORY
Connectivity & communications,Cloud,Wearables
REFERENCE DESIGN
Modify with AVAIL
PARTS IN DESIGN / BOM BY STORE

The displayed part lists is a small subset of the complete BOM.


MFGR PART# BLK NM
Avnet Abacus logo
If you are not a customer of Avnet , please Register Here for Design Hub to interact with the AVAIL design tool and view BOM lists.

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY.  SEE LEGAL NOTICES | AVNET EMEA FOR ADDITIONAL INFORMATION.

 
RELATED DESIGNS
Reference Design Block Diagram of Automotive Body Control Module based on ROHM Semiconductors Solution
Automotive Body Control Module based on ROHM Semiconductors Solution
Automotive Body Control Module (BCM) from ROHM Semiconductor is a module that controls various functions of the vehicles body, such as locks, lights, wipers, security and comfort elements.
View Design
Reference Design Block Diagram of Gen5 PCIe Switches Block Diagram based on Broadcom Solution
Gen5 PCIe Switches Block Diagram based on Broadcom Solution
Reference design based on the new PCIe Gen 5.0 series of switches, built with Broadcom industry-leading 32GT/s PCIe SerDes.
View Design
Reference Design Block Diagram of Automotive LED Lighting System Based on ROHM Semiconductors Solution
Automotive LED Lighting System Based on ROHM Semiconductors Solution
Automotive LED Lighting System from ROHM are high-performance and reliable solutions for exterior illumination of vehicles. They consist of LED drivers, LED lamps, and protection circuits.
View Design
Reference Design Block Diagram of XRF4 RF Accessory Kit based on AMD Solution
XRF4 RF Accessory Kit based on AMD Solution
The AMD XRF4 RF Accessory Kit is a modular 8-transmit, 8-receive, and 2-feedback RF front end for the Zynq UltraScale+ RFSoC DFE ZCU670 and GEN 3 ZCU208 evaluation boards.
View Design
Reference Design Block Diagram of Zynq UltraScale+ RFSoC DFE ZCU670 Evaluation Kit based on AMD Solution
Zynq UltraScale+ RFSoC DFE ZCU670 Evaluation Kit based on AMD Solution
The AMD Zynq UltraScale+ RFSoC DFE ZCU670 Evaluation Kit is a versatile platform designed for adaptive radio development, particularly for 5G New Radio (5G NR), radar, and various RF applications.
View Design
Reference Design Block Diagram of Zynq UltraScale+ RFSoC ZCU208 Evaluation Kit based on AMD Solution
Zynq UltraScale+ RFSoC ZCU208 Evaluation Kit based on AMD Solution
The AMD Zynq UltraScale+ RFSoC ZCU208 Evaluation Kit is a state-of-the-art platform designed for rapid prototyping and high-performance RF application development.
View Design
Reference Design Block Diagram of Voice Commands System based on Arduino Solution
Voice Commands System based on Arduino Solution
Control your device with voice commands using the Arduino Speech Recognition Engine, which is a technology field that captures, interprets, and computes a voice to transform it into text (TTS).
View Design
Reference Design Block Diagram of WebGL Content on a Screen System based on Arduino Solution
WebGL Content on a Screen System based on Arduino Solution
The Arduino Portenta X8 processor NXP i.MX 8M Mini Processor is capable of 3D rendering by using OpenGL to process the 3D-related calculations, allowing to display 3D content on a video output.
View Design
Reference Design Block Diagram of Smart Jacket based on Arduino Solution
Smart Jacket based on Arduino Solution
Say hello to Nicla Sense, the new sensory brain from Arduino, now built into your favorite a K-WAY jacket, powered by Edge Impulse AI, unleashing a new generation of smart clothing.
View Design
Reference Design Block Diagram of Environmental Monitoring of Corporate Offices System based on Arduino Solution
Environmental Monitoring of Corporate Offices System based on Arduino Solution
Environmental monitoring system based on sensor nodes that monitor each room and send the collected data to a gateway that can display it locally or push it toward a cloud solution.
View Design
Reference Design Block Diagram of Multi-Protocol Gateway based on Arduino Solution
Multi-Protocol Gateway based on Arduino Solution
This subsystem uses the Portenta Max Carriers onboard CMWX1ZZABZ-078 LoRaWAN module from Murata and the Wi-Fi connectivity from Portenta X8 to build a Multi-Protocol Gateway.
View Design
Reference Design Block Diagram of Solar Panel Defects Detection System based on Arduino Solution
Solar Panel Defects Detection System based on Arduino Solution
This solution for tackling this issue revolves around using computer vision and machine learning to find small defects at the surface before automatically reporting the information.
View Design
 
RELATED ARTICLES
Build better IoT applications
By Philip Ling   -   March 10, 2023
More OEMs like you now favor a microservice architecture. Remove the barriers to agile development and give your engineers greater freedom. The results will be worth the effort of migration.
Read More
What does miniaturisation mean for connector selection?
By Paul Jones   -   February 9, 2022
As electronic systems become smaller, they also require more component parts in increasingly space-constrained environments to meet extra expectations on functionality. Here Paul Jones explores what they means for connector selection across markets.
Read More
How will connectivity enable next generation autonomous vehicles?
By Sascha Spillner   -   December 6, 2021
It’s clear that the car of the future is autonomous, but what does that autonomy look like, and how will connector technologies play a role in enabling it?
Read More
How shifting to modular machine design enables Industry 4.0 strategies
By Paul Jones   -   September 22, 2021
As more and more factory and warehouse operations adopt Industry 4.0, large machinery is moving away from centralised control models to more modular machine designs. So what challenges are machine designers facing, and how can they overcome them?
Read More
The evolution of connectivity for building automation
By Martin Keenan   -   September 20, 2021
Buildings are evolving rapidly as developers try to maximise their returns, users’ expectations change, and climate-change mitigation becomes urgent. Building automation systems are being updated to address these concerns.
Read More
How technology is enabling in-home healthcare and monitoring
By Alessandro Mastellari   -   March 1, 2021
Here, Alessandro Mastellari discusses the challenges of deploying remote healthcare, and the electronics systems that can support it.
Read More
The evolution of cellular networks
By Martin Keenan   -   April 29, 2020
Since the first 5G services were launched in the USA by Verizon and AT&T, 5G networks have been rolled out in a further 17 countries with South Korea, the United Kingdom, Germany, and the United States leading the charge and China catching up fast.
Read More
The future is 5G
By Adam Chidley   -   April 29, 2020
'The explosive growth of the IoT shows no signs of abating, with Gartner forecasting 20.8 billion connected “things” by 2020, and IHS Markit predicting that this number will rise to 125 billion by 2030.'
Read More
4 keys to selecting antennas for small IoT devices
November 19, 2019
Wireless connectivity is a critical enabler for many IoT applications. While a wireless module can simplify the RF subsystem design, a working system requires careful selection of an antenna as well.
Read More
Women in engineering – where are we now?
By Lisa Rees   -   March 7, 2019
To mark International Women’s Day, we spoke to two female engineers at different points in their careers – one from the UK and one from Germany – to find out from them what their take is on being a woman in engineering and to learn more about t
Read More
From humanoids to holograms and humanity projects - How Avnet showcased the future at electronica
November 16, 2018
And so electronica 2018 is over. In our final post, we look back on the best bits of day three.
Read More
electronica 2018 day two highlights
November 15, 2018
Another day at electronica 2018 has passed and it was arguably even busier than the first. A constant stream of customers and suppliers kept the atmosphere on the Avnet Abacus stand buzzing, and our schedule was packed full of great speakers and demo
Read More
 
RELATED EVENTS
Murata | Accelerate matter product development using tri-radio solution


Date:
Location: Online, On Demand

Webinar: Antenna design and integration for Industrial IoT applications


Date:
Location: Online, On Demand