| Image | Product |
|---|---|
|
Renesas RE Family
The RE Family based on Renesas' innovative SOTB™ process technology realizes ultra-low current consumption in both active and standby mode and fast operation at low operation voltage, which is impossible to achieve with a conventional bulk transistor |
|
STMicroelectronics STM32L5
Security has emerged as one of the 3 key areas that developers of embedded and IoT applications are thriving to improve. The STM32L5 microcontroller series is the solution and provide a new optimal balance between performance, power and security. The |
|
onsemi SECO-1KW-MCTRL-GEVB
The SECO-1KW-MCTRL-GEVB is a complete reference design for three-phase motor drives, featuring the NFAQ1060L36T intelligent power module in a DIP/6 package. Rated for 230 Vac input and delivering up to 850W. All the necessary system blocks for a moto |
|
onsemi NCL31000/1 - Intelligent LED Driver
The NCL31000 is an intelligent LED driver targeting luminaire applications. The NCL31000 incorporates a high efficiency buck LED driver that supports both high-bandwidth analog and PWM dimming down to zero current. Two auxiliary DC-DC converters are |
|
Trust Platform for the CryptoAuthentication™ Family
For deployments of as few as ten units to up to many thousands of devices, Microchip's Trust Platform is a cost-effective and flexible solution for onboarding secure elements in your design and accelerating your product’s time to market. The Trust Pl |
|
|
onsemi SEC-3PH-11-OBC-EVB
The SEC-3PH-11-OBC-EVB is a three-phase On Board Charger (OBC) platform achieving state-of-the-art system efficiency with AEC-Q101 SiC power devices and drivers. The system boasts the high performance MOSFET 1200 V, 80 mΩ (NVHL080N120SC1), MOSFET Gat |
|
Macronix MX52LM04GA11xxx
Macronix 4GB eMMC integrates its MLC NAND Flash and controller into a BGA package with a standard interface to the host system. With long experience in embedded solutions Macronix has been able to develop the optimized management firmware to provide |
|
Nordic Semiconductor nRF5340 PDK
The nRF5340 PDK includes an NFC antenna that quickly enables testing of nRF5340 SoC’s NFC-A tag peripheral. A SEGGER J-Link debugger is on the board, enabling full-blown programming and debugging, of both the nR5340 SoC and external targets. All ana |
|
Alliance Memory AS4C256M16D4 and AS4C512M8D4
Compared to DDR3 SDRAMs, Alliance Memory’s new 4Gb DDR4 SDRAMs reduce operating voltages from 1.5V to +1.2V (±0.06V) to increase battery life in portable electronics such as notebook computers, smartphones, and tablets. For increased efficiency and |
|
NXP EdgeLock SE050
The EdgeLock SE050 product family of Plug & Trust devices offers enhanced Common Criteria EAL 6+ based security, for unprecedented protection against the latest attack scenarios. This ready-to-use secure element for IoT devices provides a root of tru |
|
Alliance Memory Parallel NOR Flash
With their fast boot times, Alliance Memory’s 5V parallel NOR flash solutions are ideal for high-performance and process-intensive applications. The devices’ flexible sector architectures allow any combination of sectors to be erased and reprogrammed |
|
onsemi NCS21911
The NCS2191x family of high precision Zero-Drift Op Amps feature low input offset voltage and low offset drift over time and temperature. These devices have low quiescent current and low noise performance with a rail−to−rail output swing within 10 mV |
|
Nexperia Schottky Rectifier in CFP packages
Clip-bonded FlatPower (CFP) packages with high power capabilities offer a true alternative to SMA, with better thermal performance. Selected typesPMEG60T10ELPPMEG60T10ELRPMEG60T20ELPPMEG60T30ELPPMEG60T30ELRPMEG60T50ELP Key technical features an |
|
Nordic Semiconductor nRF52833
The ultra-low power nRF52833 is a multiprotocol SoC with a Bluetooth® 5.1 Direction Finding capable radio, qualified for operation at an extended temperature range of -40°C to 105°C. It supports Bluetooth 5.1, Bluetooth mesh, 802.15.4, Thread, Zigbee |
|
Nordic Semiconductor nRF52833 DK
The nRF52833 DK is a versatile single board development kit for the Bluetooth® Low Energy, Bluetooth mesh, Thread, Zigbee (802.15.4), and 2.4GHz proprietary applications using the nRF52833 SoC. The kit supports all development for the nRF52833 SoC. |
|
Sandisk iNand IX EM132
The Industrial iNAND IX EM132 Embedded Flash Drive (EFD) is Sandisk’s most advanced e.MMC flash storage solution for industrial applications, with high reliability and endurance across a wide range of operational requirements. Designed and tested to |
|
onsemi NCP51820
The NCP51820 high-speed gate driver is designed to meet the stringent requirements of driving enhancement mode (e−mode) and gate injection transistor (GIT) GaN HEMT power switches in offline, half-bridge power topologies. The NCP51820 offers short an |
|
|
STMicroelectronics BlueNRG-M0
The BlueNRG-M0 is an easy to use Bluetooth® low energy master/slave network processor module, compliant with Bluetooth v4.2. The BlueNRG-M0 module supports multiple roles simultaneously, and can act at the same time as Bluetooth low energy sensor and |
|
Microchip SAMRH71
SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of the popular Microchip SAMV71: a highly integrated, high-performance 32-bit ARM-embedded micro-controller based on the Cortex-M7 architecture. This space-qualified version of the product a |
|
NXP NTAG I²C plus
NXP NTAG I²C plus is a family of connected NFC tags that combine a passive NFC interface with a contact I²C interface. The NTAG I²C plus connected tag is the perfect enabler for NFC, no matter if you intend to use it in consumer, IoT, medical or indu |
|
Renesas ZMOD4510
The ZMOD4510 gas sensor platform detects air quality in a variety of indoor and outdoor applications. The module is a 12-pin LGA assembly (standard version 3.0mm x 3.0mm x 0.7mm) that consists of a gas sense element and a CMOS signal conditioning IC. |
|
Panasonic PAN9028 (88W8987)
The PAN9028 is a dual band 2.4 GHz and 5 GHz 802.11 a/b/g/n/ac Wi-Fi radio module with integrated Bluetooth BR/EDR/Low Energy (LE), specifically designed for highly integrated and cost-effective applications. The simultaneous and independent operatio |
|
Panasonic PAN1740A
The PAN1740A is an optimized version of the PAN1740, offering a reduced boot time and supporting up to 8 connections to allow greater flexibility to create more advanced applications. It has a fully integrated radio transceiver and baseband processor |
|
Panasonic PAN1780
The Bluetooth 5 features additionally a higher symbol rate of 2 Mbps using the high speed LE 2M PHY or a significantly longer range using the LE coded PHY at 500 kb/s or 125 kb/s. The new channel selection algorithm (CSA#2) improves the performance i |
|
Panasonic PAN9026
The PAN9026 is a dual band 2.4/5 GHz 802.11 a/b/g/n Wi-Fi radio module with integrated Bluetooth BDR/EDR/LE, specifically designed for highly integrated and cost-effective applications. The simultaneous and independent operation of the two standards |
|
Nexperia BUK9J0R9-40
Nexperia’s latest AEC-Q101 Trench 9, 40 V automotive superjunction MOSFETs in the rugged, electrically- and thermally-efficient LFPAK56 deliver improved performance and reliability along with a footprint reduction of up to 81% when compared to tradit |
|
onsemi XGS Image Sensor Family
The first devices in the XGS family are 12 megapixel (XGS 12000), 9.4 megapixel (XGS 9400) and 4k UHD resolution (XGS 8000) image sensors, providing high resolution imaging up to 1-inch optical format for industrial imaging customers targeting a comp |
|
NXP K32 L3 MCU Family
The K32 L3 MCU family represents the third generation of Kinetis. It delivers significant improvements in power optimization and security advancements to address a wide range of industrial and IoT applications. Low-leakage, power-optimized peripheral |
|
Lumileds LUXEON MultiColor Module 2.5W
The LUXEON MultiColor Module 2.5W is a 4-in-1 package that makes color tuning easier. Each channel is individually addressable, enabling a large color gamut while simplifying the ability of getting just the right color point. The white LED source is |
|
Renesas RV1S9x60A Optocoupler Family
Today’s Industrial equipment trend is toward smaller footprints and greater energy conservation to address environmental issues and save costs. Along with this, the temperature rise that results from a high-density PCB layout and the noise generated |