| Image | Product |
|---|---|
|
Microchip ATECC608B-TFLXTLS
The Microchip ATECC608B-TFLXTLS is the TrustFLEX secure element part of the Trust Platform for the CryptoAuthentication family. The device comes pre-configured implementing the most common authentication use cases use in the embedded industry by defa |
|
Microchip's SW-TPDSv2
The Trust Platform Design Suite (TPDS) v2 is Microchip's dedicated software platform to onboard with embedded security. In addition to offer Secure Element and security solutions, Microchip also offer a full onboarding experience to start with embed |
|
Nexperia 50 µA Zener diodes
Specified at a low test current Nexperia’s 50 µA Zener diodes are ideal for low bias and portable battery-powered applications. The diodes range is available in three different surface-mountable (SMD) package options, in an ultra-small Discretes Flat |
|
Microchip Radiation Hardened Isolated DC-DC Converters
The SA series of DC-DC converters is available in both triple and single outputs. These devices are designed and qualified for the rigors of space including characterization for both Total Ionizing Dose (TID) and Single Event Effects (SEE). Operating |
|
Renesas GreenPAK™ Family
The GreenPAK™ family delivers a vast array of semiconductor products such as MCU’s/SOC’s, analog & power to provide complete coverage for the broad signal chain in electronics systems. Renesas' customers win by tapping this rich portfolio. GreenP |
|
Insight SiP ISP2053 series - Dual-core Bluetooth 5.2 Modules
Based on nRF5340 Nordic Semiconductor wireless SoC with two Arm® Cortex®-M33 processors and advanced feature set, the ISP2053 module is ideally suited for LE Audio, professional lighting, advanced wearables, industrial, medical, and other complex IoT |
|
Octavo OSDZU3 System-in-Package
The OSDZU3 is the fastest and most flexible way to develop a system around the Xilinx Zynq UltraScale+ MPSoC. It allows you to harness the performance of the ZU3 MPSoC, while removing the complexities without sacrificing flexibility. The OSZU3 integ |
|
STMicroelectronics LDBL20
The LDBL20 high accuracy voltage regulator provides 200 mA of maximum current from an input voltage ranging from 1.5 V to 5.5 V, with a typical dropout voltage of 200 mV. It is available in the new STSTAMP™ package, allowing the maximum space saving. |
|
STMicroelectronics STLQ020
The STLQ020 is a 200 mA low-dropout voltage regulator, able to work with an input voltage ranging from 2 V to 5.5 V. The typical dropout voltage at maximum load is 160 mV. The ultra-low quiescent current, which is just 0.3 μA at no load, extends bat |
|
STMicroelectronics ST1PS03
The ST1PS03 is a nano-quiescent miniaturized synchronous step-down converter, which is able to provide up to 400 mA output current with an input voltage ranging from 1.8 V to 5.5 V. This converter is specifically designed for applications where high |
|
STMicroelectronics ST1PS02
The ST1PS02 is a nano-quiescent miniaturized synchronous step-down converter, which is able to provide up to 400 mA output current with an input voltage ranging from 1.8 V to 5.5 V. This converter is specifically designed for applications where high |
|
STMicroelectronics STEF05S
The STEF05S is an integrated electronic fuse optimized for monitoring the 5 V DC power lines. When connected in series to the main power rail, it is able to precisely detect and react to overcurrent and overvoltage conditions. When an overload condi |
|
STMicroelectronics L7983
The L7983 device is a step-down monolithic switching regulator able to deliver up to 300 mA DC based on peak current mode architecture. The output voltage adjustability ranges from 0.85 V to VIN. The wide input voltage range and adjustable UVLO thres |
|
STMicroelectronics STEF512SRX
The STEF512SRX is an integrated dual electronic fuse, designed to protect circuitry on the output from overcurrent and overvoltage events, in those applications requiring hot swap operation and inrush current control. The device embeds two electronic |
|
STMicroelectronics STM6777
The STM6717/18/19/20 and STM6777/78/79/80 supervisors are a family of low-voltage/low-supply current processor (micro or DSP) supervisors, designed to monitor two (or three) system power supply voltages. They are targeted at applications such as set- |
|
|
STMicroelectronics STM6522
The Smart Reset™ devices provide a useful feature that ensures that inadvertent short reset push-button closures do not cause system resets as the extended Smart Reset™ delay setup periods are implemented. Once the valid Smart Reset™ input levels and |
|
|
STMicroelectronics STM6322
The STM6xxx supervisors are self-contained devices which provide microprocessor supervisory functions. A precision voltage reference and comparator monitors the VCCinput for an out-of-tolerance condition. When an invalid VCCcondition occurs, the rese |
|
STMicroelectronics STC3117
The STC3117 includes the STMicroelectronics OptimGauge™ algorithm. It provides accurate battery state-of-charge (SOC) monitoring, tracks battery parameter changes with operation conditions, temperature, and aging, and allows the application to get a |
|
STMicroelectronics L6362A
The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it |
|
STMicroelectronics L6360
The L6360 is a monolithic IO-Link master port compliant with PHY2 (3-wire) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The C/QO output stage is programmable: high-side, low-side or push-pull; also cut-off current, cut |
|
|
STMicroelectronics STR485E
The STR485E is a low power differential line transceiver for data transmission standard RS485 applications in half-duplex mode. Data and enable signals are compatible with 1.8 V or 3.3 V supplies. Two speeds are selectable through SLR pin: fast data |
|
STMicroelectronics L6364
The L6364 is a dual channel transceiver for industrial sensor applications. It has been designed to support the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signaling cable. |
|
|
STMicroelectronics STM6600
The STM6600-01 devices monitor the state of connected push-button(s) as well as sufficient supply voltage. An enable output controls power for the application through the MOSFET transistor, DC-DC converter, regulator, etc. If the supply voltage is ab |
|
STMicroelectronics TSB712
The TSB711, TSB711A, TSB712, TSB712A,TSB714 and TSB714A 6 MHz bandwidth amplifiers feature rail-to-rail input and output, which is guaranteed to operate from +2.7 V to +36 V single supply as well as from ±1.35 V to ±18 V dual supplies. These amplifie |
|
STMicroelectronics TSC200, TSC201 & TSC202
The TSC200, TSC201 and TSC202 are high-side current sense amplifiers which deliver an analog voltage output. They can sense current via a shunt resistor over a wide range of common-mode voltages, from -16 to +80 V, whatever the supply voltage is. The |
|
STMicroelectronics TSC1641
The TSC1641 is a high precision current, voltage, power, and temperature monitoring analog front-end (AFE). It monitors current into a shunt resistor and load voltage up to 60 V in a synchronized way. The current measurement can be high-side, low-sid |
|
STMicroelectronics TSV7722
The TSV7721, TSV7722 and TSV7723 are single and dual 22 MHz-bandwidth unity-gain-stable amplifiers. The input offset voltage of 200 µV max. (50 µV typ.) at room temperature, optimized for common-mode close to ground makes the TSV772x ideal for low-si |
|
STMicroelectronics TSV772 & TSV774
The TSV772 and TSV774 are single, dual and quad 20 MHz-bandwidth unity-gain-stable amplifiers. The rail-to-rail input stage and the slew rate of 10.5 V/µs make the TSV771, TSV772 and TSV774 ideal for low-side current measurement. The excellent accura |
|
STMicroelectronics TSB7192A
The TSB7191, TSB7191A, TSB7192 and the TSB7192A 22 MHz bandwidth amplifier feature rail-to-rail input and output, which is guaranteed to operate from +2.7 V to +36 V single supply as well as from ±1.35 V to ±18 V dual supplies. These amplifiers have |
|
STMicroelectronics TS880 & TS883
The open-drain series of nanopower comparator integrates a single version TS880 and a dual version TS883. They feature an ultra low supply current of 250 nA typical per operator with rail-to-rail input capability and open-drain output. The performanc |