| Image | Product |
|---|---|
|
STMicroelectronics HVLED101
The HVLED101 is an enhanced peak current mode controller able to control mainly high power factor (HPF) flyback or buck-boost topologies having an output power up to 180 W. Some other topologies, like buck, boost and SEPIC could also be implemented. |
|
STMicroelectronics ALED8102S
The ALED8102S is a monolithic, low voltage, 8 low-side channels LED driver. The ALED8102S guarantees up to 19 V output driving capability allowing users to connect several LEDs in series. In the output stage, 8 regulated current sources provide from |
|
STMicroelectronics L3751
The 6 V to 75 V wide input voltage range L3751 synchronous buck controller features extreme voltage conversion ratio over switching frequency range (100 kHz - 1 MHz) thanks to 40 nsec minimum conduction time. The diode emulation (DEM) implements pul |
|
STMicroelectronics L7987L
The L7987L device is a step-down monolithic switching regulator able to deliver up to 2 A DC. The output voltage adjustability ranges from 0.8 V to almost VIN. The embedded switchover feature on the VBIAS pin maximizes the efficiency at light load. T |
|
STMicroelectronics L6983I
The L6983I is a device specifically designed for isolated buck topology. The primary output voltage can be accurately adjusted, whereas the isolated secondary output is derived by using a given transformer ratio. No optocoupler is required. The prima |
|
|
STMicroelectronics L7987
The L7987 device is a step-down monolithic switching regulator able to deliver up to 3 A DC. The output voltage adjustability ranges from 0.8 V to VIN. The wide input voltage range and the 100% duty cycle capability meet the fail safe specifications |
|
STMicroelectronics ISM330DHCX
The ISM330DHCX is a system-in-package featuring a high-performance 3D digital accelerometer and 3D digital gyroscope tailored for Industry 4.0 applications. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes al |
|
STMicroelectronics STEVAL-PROTEUS1
The STEVAL-PROTEUS1 is an evaluation tool designed for temperature and vibration monitoring. It is based on a 2.4 GHz multiprotocol wireless SoC to address machine or facility condition monitoring for industrial applications. The evaluation board sim |
|
STMicroelectronics STTS22H
The STTS22H is an ultra-low-power, high accuracy, digital temperature sensor offering high performance over the entire operating temperature range. The STTS22H is a band gap temperature sensor coupled with an A/D converter, signal processing logic a |
|
STMicroelectronics IIS3DWB
The IIS3DWB is a system-in-package featuring a 3-axis digital vibration sensor with low noise over an ultra-wide and flat frequency range. The wide bandwidth, low noise, very stable and repeatable sensitivity, together with the capability of operatin |
|
STMicroelectronics TSB582
The TSB582 is a unity gain stable, dual operational amplifier with high voltage and high current capability, featuring internal protections against overtemperature and current overload conditions. In addition, the TSB582 has enhanced ESD and RF noise |
|
STMicroelectronics TSB621IY
The TSB621IY is general purpose operational amplifiers featuring an extended supply voltage operating range and rail-to-rail output. It also offers an excellent speed/power consumption ratio with 1.7 MHz gain bandwidth product while consuming less th |
|
STMicroelectronics IIS2DLPC
The IIS2DLPC is an ultra-low-power high-performance three-axis linear accelerometer with digital I²C/SPI output interface which leverages on the robust and mature manufacturing processes already used for the production of micromachined accelerometers |
|
Teltonika RUTX50
RUTX50 is your future-proof, multi-network industrial router, offering 5G mobile communication for high-speed and data-heavy applications. 5G dual SIM cellular communication combined with 5 Gigabit Ethernet ports and dual-band Wi-Fi enables reliable |
|
Nexperia 50 V & 55 V ASFETs for 36 V DC Motors
There is growing demand for 36 V DC motors, often being used with multi-cell lithium-ion battery packs, in an increasing range of applications. From cordless power tools to outdoor power equipment and even e-bikes and scooters. To drive these demandi |
|
SiTime MEMS MHz Oscillators
SiTime offers a complete portfolio of MEMS MHz oscillators. These devices offer configurable features not available with quartz and are designed for higher reliability, shorter lead times, and solving unique timing problems, such as EMI and in-system |
|
SiTime 32.768 kHz Oscillators
SiTime MEMS 32 kHz solutions are ideal for replacing traditional quartz crystal resonators in wearable and mobile applications, where space and power are critical. Features Small footprint at 1.2 mm2 (1.5 x 0.8 mm) in a chip-scale package (CSP)Ultr |
|
SiTime Precision MHz Super-TCXOs
SiTime MEMS precision oscillators deliver the most stable timing under environmental stressors – airflow, rapid temperature change, shock, vibration, poor power supply, and EMI – in a small, robust package. These devices can be programmed to any comb |
|
Navitas GaNFast™ Power ICs
A gallium nitride (GaN) power integrated circuit (IC) combines several power electronics functions onto a single GaN chip, to improve speed, efficiency, reliability and cost-effectiveness. In many cases, GaN power ICs are the enabling catalyst for ad |
|
Navitas Half-Bridge Power ICs
New GaNFast™ half-bridge ICs with GaNSense technology integrate two GaN FETs and drive, plus control, with sensing and autonomous protection, to create a fundamental building-block used in power electronics. This revolutionary, one-package solution e |
|
Microchip MIC2133
Microchip's MIC2133 is a constant, on-time, dual-phase synchronous buck controller that features an adaptive on-time control architecture with HyperLight Load® mode and phase shedding features. The MIC2133 operates over an input supply range from 4.5 |
|
Microchip MCP6C02
Microchip offers MCP6C02 high-side current sense amplifier with preset gains of 20, 50 and 100 V/V. The common-mode input range (VIP) is 3V to 65V. The differential-mode input range (VDM = VIP − VIM) supports unidirectional and bidirectional applicat |
|
TRIA SPB209A
SPB209A is a complete WLAN and Bluetooth Dual-mode module ready for onboard integration in Linux platforms. .The ultra-small 12x14x2.5mm low power, high performance module enables a feature rich client solution providing up to 433Mbit/s data rate. SP |
|
Panasonic PAN1770
The PAN1770 is a Bluetooth 5.1 Low Energy (LE) module based on the Nordic nRF52840 single-chip controller that allows you to attach an external antenna via uFL. The Bluetooth 5.1 features additionally a higher symbol rate of 2 Mbps using the high-spe |
|
STMicroelectronics STM32WB55xx
The STM32WB55xx and STM32WB35xx multiprotocol wireless and ultra-low-power devices embed a powerful and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification 5.3 and with IEEE 802.15.4-2011. They contain a dedicated Arm® Co |
|
STMicroelectronics TSB512
The TSB511, TSB512, TSB514 is a series of 6 MHz bandwidth amplifiers featuring rail-to-rail input and output, which are guaranteed to operate from 2.7 to 36 V single supply as well as from ± 1.35 V to ± 18 V dual supplies. These amplifiers have the a |
|
STMicroelectronics STISO621
The STISO621 are dual-channel digital isolators based on the ST thick oxide galvanic isolation technology. The devices provide two independent channels in opposite direction with Schmitt trigger input, providing robustness to noise and high speed inp |
|
STMicroelectronics STELPD01
The STELPD01 is an integrated electronic power switch for power rail protection applications. It is able to precisely detect and react to overcurrent and overvoltage conditions. When an overload condition occurs, the device goes into an open state, |
|
STMicroelectronics STEVAL-ASTRA1B
The ASTRA platform (STEVAL-ASTRA1B) is a development kit and reference design that simplifies prototyping, testing and evaluating advanced asset tracking applications such as livestock monitoring, fleet management, and logistics. It comes with compr |
|
Renesas RZ/N2L
The Renesas RZ/N2L is the Industrial Ethernet LSI that realizes Industrial Ethernet communication by easy adoption onto existing system with parallel host interface and serial host interface that is interface connect to external CPU. RZ/N2L supports |