This evaluation board provides a good design example for a cost-effective 1.44W single output 12V at 120mA power application useful in home appliance powers.
VIEW DESIGN
The 1.6kW power supply converts an AC input (90 to 264V) into 12VDC by a semi-brideless PFC circuit and an isolated phse-shift full bridge.
VIEW DESIGN
10W to 40W Power Applications Power Tree based on TDK uPOL Power Modules Solution, saving space and design time without compromising in performance.
VIEW DESIGN
150-250W Switch Mode Power Supply (SMPS) for Audio/Video applications, based on TDK solutions.
VIEW DESIGN
15 Watt Single-Coil Wireless Charging Transmitter Reference Platform.
VIEW DESIGN
DC-DC 18W PD3.0 PPS car charger evaluation board composed of two main parts: The AN6575 synchronous four-switch buck-boost DC/DC controller and the AP43771 decoder IC.
VIEW DESIGN
This evaluation board, based on Diodes AP3917C, provides a good design example for a cost-effective 2.1W single output 12V/175mA power application used in home appliances.
VIEW DESIGN
The STEVAL-ISB040V1 is a wireless receiver evaluation board based on the STWLC03 integrated wireless power receiver.
VIEW DESIGN
2400W high power density power factor correction (PFC) converter based on Infineon Solution.
VIEW DESIGN
2400W high power density power factor correction (PFC) converter based on Infineon Solution.
VIEW DESIGN
2500W full-bridge totem-pole PFC using CoolGaN 600V e-mode HEMT based on Infineon Solution.
VIEW DESIGN
2500W full-bridge totem-pole PFC using CoolGaN 600V e-mode HEMT based on Infineon Solution.
VIEW DESIGN
250W Switch Mode Power Supply (SMPS) for Automatic Doors, based on TDK solutions.
VIEW DESIGN
This ZVS phase-shift full-bridge evaluation board represents the ZVS DC-DC converter for telecom rectifiers with an output voltage from 45 to 56VDC and an output power of 2kW.
VIEW DESIGN
Audio amplifier with half bridge topology and Low-pass filter, can handle up to 300W.
VIEW DESIGN
3300W CCM totem pole PFC - 3300 W solution featuring CoolMOS and CoolSiC based on Infineon Solution.
VIEW DESIGN
3300W CCM totem pole PFC - 3300 W solution featuring CoolMOS and CoolSiC based on Infineon Solution.
VIEW DESIGN
The Battery Management Unit (BMU) is part of the Battery Management System of a vehicle. It connects and disconnects the high voltage connections.
VIEW DESIGN
The Cell Management Unit (CMU) is part of the Battery Management System of a vehicle. A CMU measures voltage, current, and temperature in each cell of a battery pack to ensure safe operation.
VIEW DESIGN
Highly efficient and primary-side regulated (PSR) auxiliary power supply targeting hybrid electric vehicle (HEV) and electric vehicle (EV) automotive power trains.
VIEW DESIGN
Evaluation board to drive a 3 Hall sensor three phase brushless DC motor with supply voltage of 48V (typ) and motor current of 8A (max).
VIEW DESIGN
AC-DC Power supply that handles up to 600W and ideal for Class D audio amplifiers.
VIEW DESIGN
AC-DC Power supply, supporting up to 700W, ideal for Class D audio amplifiers.
VIEW DESIGN
This evaluation board, featuring Diodes' AP3928, provides a good design example for a cost-effective 9.9W single output 18V/550mA power application used in home appliances.
VIEW DESIGN
Reference Design of Variable Frequency and AC Motor Drive Solution based on NXP
VIEW DESIGN
An evaluation board that enables direct input of AC power to a BLDC motor unit by installing an ACDC converter circuit in the drive circuit for a three phase DC brushless motor (hereafter BLDC...
VIEW DESIGN
AMD Artix 7 FPGAs Power Tree with SERDES based on TDK uPOL Power Modules Solution, saving space without compromising in performance.
VIEW DESIGN
AMD Artix 7 FPGAs Power Tree based on TDK Power Modules Solution, saving space and design time without compromising in performance.
VIEW DESIGN
