2400W high power density power factor correction (PFC) converter based on Infineon Solution.
VIEW DESIGN
This ZVS phase-shift full-bridge evaluation board represents the ZVS DC-DC converter for telecom rectifiers with an output voltage from 45 to 56VDC and an output power of 2kW.
VIEW DESIGN
5G New Radio Distributed Unit. 5G New Radio (NR) is the global standard for a unified, more capable 5G wireless air interface.
VIEW DESIGN
Starter Recipe for the AMD Artix-7 family of cost and transceiver optimized FPGAs.
VIEW DESIGN
Starter Recipe for the AMD Versal AI family of ACAP devices.
VIEW DESIGN
Evaluation kit with Zynq UltraScale+ MPSoC device with ARM Cortex-A53, dual-core Cortex-R5 real-time processors, and Mali-400 MP2 graphics processing unit.
VIEW DESIGN
This evaluation board integrates Diodes' AP22615, which provides an adjustable current limited feature optimized for applications that require precision current limiting support.
VIEW DESIGN
This evaluation board integrates Diodes' AP22815, which provides an adjustable current limited feature optimized for applications that require precision current limiting support.
VIEW DESIGN
This evaluation board features Diodes' AP61100Q 1A synchronous buck converter, with an input voltage range of 2.3V to 5.5V.
VIEW DESIGN
This evaluation board, featuring Diodes AP62200 device, is optimized for Electromagnetic Interference (EMI) reduction.
VIEW DESIGN
Reference design based on the Broadcom BCM5340X/BCM5341X System-on-a-Chip (SoC) Ethernet switch family. These devices offer up to 16 multilayer 10GbE ports.
VIEW DESIGN
Reference design based on the Broadcom BCM5346X, System-on-a-Chip (SoC) Ethernet switch family.
VIEW DESIGN
Reference design based the Broadcom StrataConnect BCM53570. Features an integrated high-speed ARM Cortex-A9 processor, embedded Cortex-R5 processor, and enterprise-level buffer and table sizes.
VIEW DESIGN
Reference design based on Broadcom's BCM56170 Access Switch with 100-FX/1G/2.5G/5G/10G/25G-Capable SerDes Lanes.
VIEW DESIGN
Reference design based on the Broadcom BCM56860 Ethernet Switch, with support for up to eight 100GbE ports and more than 100 10GbE ports.
VIEW DESIGN
Timing solution for Broadcom's BCM56860 StrataXGS Trident-II+ switch series.
VIEW DESIGN
Reference design based on the BCM8279 which is a monolithic, dual-port, 100 Gigabit Ethernet gearbox.
VIEW DESIGN
A reference design based on Broadcom's single-port 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE-TX Ethernet CMOS transceiver.
VIEW DESIGN
Reference design based on Broadcom's BCM87360 Optical PHY. It is a single-chip, 8x106-Gb/s full-duplex Pulse Amplitude Modulation (PAM-4) PHY.
VIEW DESIGN
The Bluetooth Low Energy (BLE) Beacon reference design is a compact form factor, open source design which can be used with beacon profiles.
VIEW DESIGN
Generic BLE beacon block diagram featuring 32-Bit BLUERNG ARM Cortex MCU for IoT, battery charger, and RF circuit.
VIEW DESIGN
BlueTile - Bluetooth LE enabled sensor node development kit. This sensor board has accelerometer, gyroscope, magnetometer, pressure, humidity, ToF and microphone sensors.
VIEW DESIGN
The X-NUCLEO-IDB04A1 is a Bluetooth low energy evaluation board that allows expansion of the STM32 Nucleo boards.
VIEW DESIGN
Reference design based on the new PCIe Gen 5.0 series of switches, built with Broadcom industry-leading 32GT/s PCIe SerDes.
VIEW DESIGN
The i.MX 8M Mini EVK provides a platform for comprehensive evaluation of NXP's i.MX 8M Mini and i.MX 8M Mini Lite applications processors.
VIEW DESIGN
AMD Kintex Field Programmable Gate Array (FPGA) KC705 Evaluation Kit Reference Design.
VIEW DESIGN
AMD Kintex UltraScale+ Field Programmable Gate Array (FPGA) KCU116 Evaluation Kit Reference Design.
VIEW DESIGN
The LS1012A reference design board is a compact form-factor tool for evaluating and developing LS1012A-based application solutions.
VIEW DESIGN
This design, featuring NXP's QorIQ LS1024A communications processor, provides low-power based performance scalability and flexibility for network attached storage applications.
VIEW DESIGN
Low-Power Wide-Area module that serves as a stopping point for data to flow through different networks. The diagram is based on the Semtech Baseband Transceiver for 915MHz and 864MHz.
VIEW DESIGN