Reference Design Details

Design Hub

Search Reference Designs

12V - 150W Power Supply based on STMicroelectronics Solution - Motherboard

The EVL011A150ADP is a 12 V, 150 W power supply demonstration board for 90 Vac to 264 Vac mains, which is representative of an AC/DC converter for an all in one (AIO) computer or a general purpose high power adapter. The design is based on the STNRG011A IC, a digital combo that controls a two-stage AC/DC SMPL. The front-end is a transition mode PFC pre-regulator and the second stage is an LLC HB resonant converter. The SRK2001 implements the synchronous rectification in order to obtain higher efficiency.
CATEGORY
Power & charging
REFERENCE DESIGN
×
Share Reference Design

Design Shared Successfully!

PARTS IN DESIGN / BOM BY STORE

The displayed part lists is a small subset of the complete BOM.


MFGR PART# BLK NM
Avnet Abacus logo
If you are not a customer of Avnet , please Register Here for Design Hub to interact with the AVAIL design tool and view BOM lists.

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY.  SEE LEGAL NOTICES | AVNET EMEA FOR ADDITIONAL INFORMATION.

 
RELATED DESIGNS
Reference Design Block Diagram of 48V Resettable eFuse Reference Design based on Vishay Solution
48V Resettable eFuse Reference Design based on Vishay Solution
This electronic fuse (eFuse) solution has been designed to switch loads up to 200 A at 48 V, providing a new method of safely connecting and disconnecting high current loads to a battery.
View Design
Reference Design Block Diagram of Marvell Armada 88F, 7K-8K, XP Series Power Rails based on TDK uPOL Power Module Solution
Marvell Armada 88F, 7K-8K, XP Series Power Rails based on TDK uPOL Power Module Solution
Marvell Armada multi-core ARM SoCs (88F, 7K/8K, XP Series) power rails based on TDK uPOL Power Module Solution.
View Design
Reference Design Block Diagram of Zynq UltraScale+ RFSoC Gen 1-3 (Zu021-Zu029) Power Mapping based on Infineon Solution
Zynq UltraScale+ RFSoC Gen 1-3 (Zu021-Zu029) Power Mapping based on Infineon Solution
Solution for powering the Zynq UltraScale+ RFSoC Family based primarily on Infineon parts, power monitor and power sequence required.
View Design
Reference Design Block Diagram of 12V - 150W Power Supply based on STMicroelectronics Solution - Synchronous Rectification board
12V - 150W Power Supply based on STMicroelectronics Solution - Synchronous Rectification board
The EVL011A150ADP is a 12 V, 150 W power supply demonstration board for 90 Vac to 264 Vac mains.
View Design
Reference Design Block Diagram of 3 Phase Fast DC EV Charging Station based on Vishay Solutions
3 Phase Fast DC EV Charging Station based on Vishay Solutions
3 Phase Fast DC EV Charging grid infrastructure solution for industrial segment charging stations
View Design
Reference Design Block Diagram of 12V - 150W Power Supply based on STMicroelectronics Solution - Motherboard
12V - 150W Power Supply based on STMicroelectronics Solution - Motherboard
The EVL011A150ADP is a 12 V, 150 W power supply demonstration board for 90 Vac to 264 Vac mains.
View Design
Reference Design Block Diagram of 12V - 150W Power Supply based on STMicroelectronics Solution - Feedback Control
12V - 150W Power Supply based on STMicroelectronics Solution - Feedback Control
The EVL011A150ADP is a 12 V, 150 W power supply demonstration board for 90 Vac to 264 Vac mains.
View Design
Reference Design Block Diagram of Smart Battery Management for Mobile Robotics based on NXP
Smart Battery Management for Mobile Robotics based on NXP
Reference design of the NXPs RDDRONE-BMS772 is a standalone BMS reference design suitable for mobile robotics such as drones and rovers, supporting 3 to 6 cell batteries
View Design
Reference Design Block Diagram of i.MX RT Industrial Drive Development Platform based on NXP Solutions
i.MX RT Industrial Drive Development Platform based on NXP Solutions
Reference Design for a single i.MX RT1176 Crossover MCU controling 4 different motors while managing connectivity and HMI interface based on NXP
View Design
Reference Design Block Diagram of AC & Variable Frequency Driven (VFD) Motor based on NXP Solution
AC & Variable Frequency Driven (VFD) Motor based on NXP Solution
Reference Design of Variable Frequency and AC Motor Drive Solution based on NXP
View Design
Reference Design Block Diagram of Motion Control and Robotics based on NXP Solution
Motion Control and Robotics based on NXP Solution
Reference Design for compact multi-axis motion control all the way up to high-performance robotics applications.
View Design
Reference Design Block Diagram of Portable Brushed DC Motor Control based on NXP Solution
Portable Brushed DC Motor Control based on NXP Solution
Reference Design of a Portable Brushed DC Motor based on NXP Solution
View Design
 
RELATED ARTICLES
How to Select Power Supplies for Medical Devices
By James Spencer   -   February 8, 2024
This article aims to assist in selecting the correct power supply for medical applications. It explains the main factors to consider in identifying the optimal power supply option and provides a brief overview.
Read More
Investigating the design challenges of EV charging
March 10, 2023
As we emerged from lockdowns across the region, the shift in consumer preferences for buying an electric vehicle became very apparent.
Read More
An introduction to EV charger design: the power stages
September 19, 2022
EV chargers operate in a sometimes-harsh environment, but must be efficient and reliable with a long service lifetime. This blog picks out and discusses some components that are critical to achieving these goals.
Read More
Engineering better railways
By Philip Lechner   -   January 25, 2022
The pressure to decarbonise the economy affects every aspect of our lives, from what we eat to how we travel. It is driving innovation throughout the transport sector, and particularly in railways.
Read More
Better batteries build more sustainable electronics
By Marc Eichhorn   -   December 6, 2021
IoT ecosystems are reliant on distributing many Things into a wide variety of arbitrary environments. However, the key to the long term, low maintenance operation of these remote devices lies a combination of battery technology and energy harvesting.
Read More
Next Generation PCB-mounted relays in EV charging systems
By Adam Losonczy, Avnet Abacus   -   November 25, 2021
2021 is shaping up to be the year in which adoption of the Electric Vehicle takes off. First half sales in the key markets of China, the USA and Europe, accounted for 26% of all new vehicle sales, globally and, in the UK alone.
Read More
From AC to DC: powering intelligent buildings
By Philip Lechner   -   September 21, 2021
There is a lot of interest in how to power the electronic and electrical devices in buildings of the future. Not just limited to energy savings, it includes how to integrate new energy sources such as solar, wind turbines and batteries.
Read More
Product compliance after Brexit: UKCA and what you need to know
By Andrew Hutton   -   March 17, 2021
From the end of 2021, the CE mark will no longer be recognised in the UK. Andy Hutton gives a run down of what you need to know about the new UKCA mark.
Read More
Keeping the public healthy: preventative care for a well society
By Marc Eichhorn   -   February 26, 2021
One of the first recorded examples of real science being used to improve public health comes from the case of Dr John Snow, who in the mid 1800s successfully identified contaminated water as the cause of cholera.
Read More
MOPP vs. MOOP: how to specifiy medical power supplies
By Philip Lechner   -   December 8, 2020
Philip Lechner examines IEC/EN 60601-1 and how to differentiate between safety requirements when specifying medical power supplies.
Read More
AC-DC power supply design: how to specify capacity
By Philip Lechner   -   January 15, 2020
AC-DC power supply design - how to pick an AC-DC power supply, and 80 PLUS Certification in context
Read More
Taking flow measurement to the next level
By Alan Jermyn   -   October 25, 2019
Avnet Abacus helps engineers to develop smart flow meters for monitoring water and gas consumption. Alan Jermyn, VP Marketing, looks at what’s driving demand for smart meters, how they work and how they’re built.
Read More