onsemi NCV51561

The NCV51561 are isolated dual-channel gate drivers with 4.5-A/9-A source and sink peak current respectively. They are designed for fast switching to drive power MOSFETs, and SiC MOSFET power switches. The NCV51561 offers short and matched propagation delays. Two independent and 5 kVRMS (UL1577 rating) galvanically isolated gate driver channels can be used in any possible configurations of two low side, two high-side switches or a half-bridge driver with programmable dead time. An enable pin shutdown both outputs simultaneously when is set low. The NCV51561 offers other important protection functions such as independent under-voltage lockout for both gate drivers and enable function.

Features

• 4.5-A Peak Source, 9-A Peak Sink Output Current Capability
• Output Supply Voltage from 6.5 V to 30 V with 5-V, 8-V, and 17-V UVLO threshold
• Propagation Delay Typical 36 ns with 8 ns Max Delay Matching per channel
• User Programmable Input Logic for Single or Dual-input modes via ANB
• ​Common Mode Transient Immunity CMTI > 200V/ns
• ​5 kVRMS Galvanic Isolation from input to each output & 1500 V peak differential voltage between output channels
• AEC Qualified

Benefits

• Improve efficiency and allow direct drive of high power switches
• Offer proper protections for both MOSFET's and SiC FET
• Very good signal integrity and fit with fast switching speed applications
• Offer flexibility in design and topologies
• Improved robustness in fast slew rate high voltage and high current switching applications
• Provide safety and protection in applications requiring high isolation level

Applications

• Electrical Vehicles
• EV Charging Stations

Product overview