This is a toast message
STM32 Dynamic NFC-RFID tag Solution based on STMicroelectronics ST25DV64KC Expansion Board
This design is based on the STMicroelectronics X-NUCLEO-NFC07A1 expansion board. This evaluation board is based on the ST25DV64KC dynamic NFC/RFID tag IC with a 64-Kbit dual interface EEPROM and fast transfer mode feature. It can be powered through the STM32 Nucleo development board or directly through the received carrier electromagnetic field. The board used the ST morpho, with the Arduino UNO R3 connector pin assignment. The board also features a single-layer antenna with a diameter of 54 mm and copper etched on the PCB.
CATEGORY
Connectivity & communications
CREATED DATE:
Viewed 111 times
Bookmark
REFERENCE DESIGN
Would you like this design to be modifiable in the future?
PARTS IN DESIGN / BOM BY STORE
The displayed part lists is a small subset of the complete BOM.
| MFGR | PART# | BLK NM |
|---|
If you are not a customer of Avnet , please Register Here for Design Hub to interact with the AVAIL
design tool and view BOM lists.
IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY. SEE LEGAL NOTICES | AVNET EMEA FOR ADDITIONAL INFORMATION.
RELATED EVENTS
