Dual Pre-Regulation Power Delivery for AMD's Zynq UltraScale+ MPSoC based on onsemi Solution
The AMD Automotive XA Zynq UltraScale+ MPSoC family is qualified according to AEC-Q100 test specifications with full ISO 26262 ASIL C level certification. With total power usually under 15 W, this application requires no more than one or two buck regulators for pre-regulation. Dual pre-regulator configuration where an NCV891330 provides the additional power required for the PL rails. It is representative of ZU2EG and ZU3EG devices and can, for instance, be used in smart sensors.
CATEGORY
Automotive & transportation; Sensors
REFERENCE DESIGN
PARTS IN DESIGN / BOM BY STORE
Grayed out parts are unavailable for purchase on Avnet Silica.
The displayed part lists is a small subset of the complete BOM.
| MFGR | PART# | BLK NM |
|---|---|---|
| onsemi | NVMFD5C466NLT1G | MOSFET |
| onsemi | NCV330MUTBG | Load Switch |
| onsemi | NCP81241MNTXG | DC to DC Controller |
| onsemi | NCV97200MW01R2G | DC to DC Converter |
| onsemi | NCV891330PD50R2G | DC to DC Converter |
| onsemi | NCV6356QMTWTXG | DC to DC Converter |
| Microchip | MCP1726T-3302E/SN | PMIC |
| onsemi | NCV6323FELMTW11TBG | DC to DC Converter |
If you are not a customer of Avnet Silica, please Register Here for Design Hub to interact with the AVAIL design tool and view BOM lists.
IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY. SEE LEGAL NOTICES | AVNET EMEA FOR ADDITIONAL INFORMATION.
RELATED DESIGNS
