onsemi NCV84003F | Protected Power Switches
12V SmartFET, self-protected single CH high side driver, 3.6 mohm Rdson, TSSOP14
The NCV84003F is a fully protected single channel high side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids, and other actuators. The device incorporates advanced protection features such as active inrush current management, over-temperature shutdown with latch-off. A dedicated Current Sense pin provides precision analog current monitoring of the output as well as fault indication in case of output short circuit to Supply, overload, overtemperature, OUT short circuit to GND, and OFF state open load detection. A Diagnostic Enable pin allows all diagnostic and current sense features to be enabled or disabled during device operation.
Key features
- Intelligent retry for inrush management
- Analog current sense output
- Load adaptive slew rate control
- Differentiated fault diagnostics reporting
- Dynamic and absolute thermal shutdown
- Direct drive communication
- Over voltage protection clamp
- Under-Voltage lockout
- Fixed over-current shutdown
- Off state open load detection with external circuitry
- AEC-Q100 Automotive qualified and PPAP capable
- Safety design ASIL B
Applications
- Protected load switching
- Switching resistive and inductive loads
- Electromechanical relay replacement
- Zonal power distribution
- Zonal control unit
- Power distribution unit
- Body control modules
- Automotive Safety / ADAS
- Software defined vehicles
Do you have a Question?
Contact EBV
If you need any assistance, please click below to find your closest EBV sales office.
Related documents |