New Product Introduction

Octavo OSD335x-SM System-in-Package

OSD335x-SM - Smallest AM335x module, quickest design

Octavo OSD335x-SM - disassembled chip illustration

The OSD335x-SM is the smallest Texas Instruments AM335x module.  It integrates the TI Sitara™ ARM® Cortex®-A8 AM335x processor, DDR3 memory, TPS65217C PMIC, TL5209 LDO, all the needed passives, and 4KB of EEPROM into a single BGA package.  At 21mm X 21mm, it is 60% smaller than the discrete components and 40% smaller than the OSD335x.

The OSD335x-SM utilizes the same wide 1.27mm (50mil) pitch as the rest of the OSD335x family.  This combined with a new optimized Pin Map allows designers to escape all the BGA signals in a single layer.  The wide pitch also simplifies the assemble process and removes common concerns associated with manufacturing BGAs.

The OSD335x-SM also gives designers the ability to tailor the device to meet their needs.  The I/O Voltage Domains and the ADC Ranges are both programmable.  The PMIC low power modes are also made accessible as well as the PMIC voltage monitors giving the ability to more finely tune the power performance of the final design.

The OSD335x-SM is the perfect solution for the designer that is looking for the most flexible ARM-based solution in the smallest footprint.

Additional Variants

OSD335x – Same functionality in a larger package and NO EEPROM.
OSD335x C-SiP – Same functionality adding eMMC Flash, and MEMs Oscillator, in 27mm X 27mm package.

 

Features

  • Integrated into a single BGA Package:
    • Texas Instruments Sitara™ AM335x ARM® Cortex®-A8 Processor
    • up to 1GB DDR3L Memory
    • TPS65217C Power Management IC
    • TL5209 LDO
    • 4KB EEPROM
    • Passives
  • TI AM335x Features:
    • up to 1GHz
    • 8 Channel 12-bit SAR ADC
    • Ethernet 10/100/1000 x2
    • USB 2.0 HS OTG + PHY x2
    • MMC, SD and SDIO x3
    • LCD Controller
    • SGX 3D Graphics Engine
    • PRU Subsystem
  • Access to all AM335x Peripherals
    • CAN, SPI, UART, I2C, GPIO, etc.
  • Support for Industrial Protocols
    • EtherNet/IP, PROFIBUS, PROFINET RT/IRT, SERCOS III
  • Power In: AC Adapter, USB, or Single cell (1S) Li-Ion/Li-Po Battery
  • Power Out: 1.8V, 3.3V and SYS (Switched VIN)
  • Selectable AM335x I/O Voltage: 1.8V or 3.3V
  • 256 Ball BGA (21mm x 21mm)
  • 16 x 16 grid, 1.27mm Pitch
  • Case Temp Range: 0° to 85°C, -40° to 85°C

 

Block diagram

Octavo OSD335x-SM block diagram

Links & Documents



Have a question? Contact us

Email:
For general questions:
yourmessage@avnet.eu

Local Avnet Silica offices:
Click here to find contact information for your local Avnet Silica team.