Custom Meta Tags - Dynamic

Hero Banner

New Product Introduction

NPI Body

onsemi Image sensors AR0822

High performance rolling shutter image sensor, 8Mpixel, ½“ optical format

The AR0822 is an 8-megapixel (MP) stacked 1/1.8−inch (8.81mm diagonal) BSI (back-side illuminated) CMOS digital image sensor based upon a 2.0 µm pixel. It features an active−pixel array of 3840 (H) x 2160 (V) and is capable of 4K video at 60 frames-per-second (fps), capturing images in either linear or eHDR modes (120 dB) with a rolling−shutter readout.

Key features

4K (8 MP) at 60 fps for excellent video performance
Fast, full-resolution video capture of 3840 X 2160 at 30 fps in 3- exposure embedded high dynamic range (eHDR) up to 120 dB
Advanced on-sensor eHDR reconstruct with flexible exposure ratio control

Additional features

Standard optical format with of the shelf lenses.
Catching details in different lighting situation at the same time
Leading low light performance
Supporting 4K Video standard
Fast frame rate to catch moving objects
Low power at max performance
Supporting additional power savings

Applications

4K/ 8 MP imaging
Security and surveillance cameras
Robotics
Vehicle dashboard cameras

Available tools

Evaluation boards:

AR0822NPSC10SMTAH3-GEVB - 8MP Evaluation Board with 8MP color 10deg rolling shutter CMOS Image Sensor

The AR0822NPSC10SMEAH3-GEVB Sensor Board uses the high performance 2.0 um backside illuminated (BSI) pixel with eHDR technology from onsemi. The sensor board can be interfaced to the Demo3 Evaluation Board, or with the AP1302 Evaluation Board stacked on Demo3 Evaluation Board. The combined kit uses the popular DevSuite software from onsemi to configure the system. The software provides a comprehensive setup interface and flexibility to evaluate the sensor’s features and capabilities.
AR0822NPSM10SMTAH3-GEVB - 8MP 1/2 CIS MPBGA75 MONO 10DEG CRA SER Demo3 HB

The AR0822NPSM10SMEAH3-GEVB Sensor Board uses the high performance 2.0 um backside illuminated (BSI) pixel with eHDR technology from onsemi. The sensor board can be interfaced to the Demo3 Evaluation Board, or with the AP1302 Evaluation Board stacked on Demo3 Evaluation Board. The combined kit uses the popular DevSuite software from onsemi to configure the system. The software provides a comprehensive setup interface and flexibility to evaluate the sensor’s features and capabilities.

The sensor board comes with a lens suitable for evaluation. Users can use their own lens as long as it is compatible with the mechanical & optical requirements.