Custom Meta Tags - Dynamic

Hero Banner

New Product Introduction

NPI Body

Broadcom ACPL-C799 optically isolated sigma-delta modulator

The ACPL-C799 is a 1-bit, second-order sigma-delta modulator that converts an analog input signal into a high-speed data stream with galvanic isolation.

The ACPL-C799 is a 1-bit, second-order sigma-delta (Σ-Δ) modulator that converts an analog input signal into a high-speed data stream with galvanic isolation based on optical coupling technology.The ACPL-C799 operates from a 5V power supply with dynamic range of 77 dB with an appropriate digital filter. The differential inputs of ±50 mV (full scale ±80 mV) are ideal for direct connection to shunt resistors or other low-level signal sources in applications such as motor phase current measurement.

Key features

77 dB SNR typ
1.3 μV/°C maximum offset drift
10 MHz internal clock
1-bit, second-order sigma-delta modulator

Additional features

±50 mV linear range with single 5 V supply (±80 mV full scale)
77 dB SNR typ
1.3 μV/°C maximum offset drift
10 MHz internal clock
1-bit, second-order sigma-delta modulator
±1% gain error
25 kV/μs common-mode transient immunity
Safety approval UL, CSA and IEC/EN/DIN EN 60747-5-5

Applications

Motor phase and rail current sensing
Power inverter current sensing
General purpose current sensing
Servo and Motor Drive

Coupling technology

The analog input is continuously sampled by a means of sigma-delta over-sampling using an on-board clock. The signal information is contained in the modulator data, as a density of ones with data rate of 10 MHz, and the data are encoded and transmitted across the isolation boundary where they are recovered and decoded into high-speed data stream of digital ones and zeros. The original signal information can be reconstructed with a digital filter. The serial interface for data and clock has a wide supply range of 3 V to 5.5 V.

Combined with superior optical coupling technology, the modulator delivers high noise margins and excellent immunity against isolation-mode transients. With 0.5 mm minimum distance through insulation (DTI), the ACPL-C799 provides reliable reinforced insulation and high working insulation voltage, which is suitable for fail-safe designs. This outstanding isolation performance is an excellent alternative to devices based on capacitive- or magnetic-coupling with DTI in micro-meter range. Offered in a Stretched SO-8 (SSO-8) package, the isolated ADC delivers the reliability, small size, superior isolation and over-temperature performance motor drive designers need to accurately measure current at much lower price compared to traditional current transducers.

Learn more about Broadcom industrial motion control and industrial robotics solutions:

INDUSTRIAL AUTOMATION