Web Content Viewer

This is a toast message

LED Backlight for Touchscreens and Cameras based on Nexperia Solution

Generic reference design for LED backlight for touchscreens and cameras. Features N-channel MOSFETs for switch activation providing greater high-current transient robustness. It also has a freewheeling Schottky diode that operates between 60-100V and provides MOSFET protection. This design has cameras to provide greater visibility of the front and rear of vehicles.

av-dh-disclaimer-ebv

IMPORTANT NOTICE AND DISCLAIMER: AVNET PROVIDES THESE DESIGN FILES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY. SEE LEGAL NOTICES | AVNET EMEA FOR ADDITIONAL INFORMATION.

ebv content library/home/design/av-dh-disclaimer-ebv av-dh-disclaimer-ebv

Related Designs Portlet

RELATED DESIGNS

CY3689 EZ-USB FX2LP Discovery Kit based on Infineon Solution

200 views

Created: 02/18/2025

EZ-USB(TM) FX2LP and EZ-USB(TM) FX2G2 are the industry's de facto USB peripheral controllers, adding USB connectivity of up to 480 Mbps to any system.

View Design

USB Type C Basic Charger Based on Microchip Solution

164 views

Created: 11/02/2022

Basic Type-C charger based on Microchip solution providing a dual USB port power switch PD controller and a synchronous buck current-mode controller.

View Design

100W USB Power Delivery (PD) Adaptor with Multi-Output based on Renesas Solution

98 views

Created: 08/25/2023

This Renesas design includes a boost power factor correction (PFC), quasi-resonant (QR) flyback controller power, DC/DC buck, USB power delivery (PD) controller, and an MCU.

View Design

100 W 2-Stage Boost and Isolated Flyback Dimmable LED Ballast based on Power Integrations Solution

81 views

Created: 12/22/2022

100 W LED ballast with 3-way dimming function. The LED ballast is designed to provide a 48 V output voltage across 0 mA to 2080 mA output current.

View Design

300W Wireless Power Transfer-Transmitter based on Microchip Solution

80 views

Created: 12/22/2022

Reference Design of a Power-Efficient 300W Wireless Power Transfer-Transmitter based on Microchip Solution.

View Design

LED Backlight for Touchscreens and Cameras based on Nexperia Solution

74 views

Created: 01/13/2023

Generic reference design for LED backlight for touchscreens and cameras. Features N-channel MOSFETs for switch activation providing greater high-current transient robustness.

View Design

Adaptive Front LED Lights based on Nexperia Solution

70 views

Created: 01/13/2023

Generic reference design for adaptive front LED lights. Features driver MOSFETs enabled by LFPAK56. It also has ESD protection, Schottky rectifiers, a high side switch of 80V.

View Design

STM32 LED Driver based on STMicroelectronics LED1202 Expansion Board

69 views

Created: 11/15/2022

The X-NUCLEO-LED12A1 LED driver expansion board for STM32 Nucleo features four LED1202 devices that can drive up to 48 LEDs.

View Design

CO Detector based on Microchip Solution

66 views

Created: 12/06/2022

Battery-powered CO detection system with sound and visual alarm functions controlled by Microchip's PIC microcontroller solutions.

View Design

Voltage-Current Input Group isolation for PLC applications based on Microchip Solution

66 views

Created: 10/18/2022

Voltage-Current Input (Group isolation and protection) for Programmable Logic Computer (PLC) applications based on Microchip Solution

View Design

Inrush Current Limiter for Active AC-DC Bridge Rectifier based on STMicroelectronics Solution

61 views

Created: 08/01/2024

The STEVAL-SCR002V1 introduces a simple and innovative AC-DC front-end circuit that allows the designer to perform an inrush current limitation in any converter with input rectifier bridge...

View Design

FRDM-K64F Development Platform based on NXP Solution

61 views

Created: 10/27/2022

Ultra-low-cost development platform for NXP's Kinetis K64, K63, and K24 MCUs.

View Design

DH Related Articles Menu

Powering building alarm systems and driving LEDs

By Bernard Vincens - October 3, 2022

This article investigates the technical considerations for powering building alarm control systems, sensors, and indicator panels, emphasising power conversion efficiency and achieving a low power consumption profile.

An engineers' guide to watchdog supervisors and wired communication interfaces in building control HMIs

By Bernard Vincens - September 14, 2022

This article investigates some of the causes of unpredictable system behaviour and highlights components that can prevent it from happening.

Investigating the technical considerations for analog components used in motion control drives

By Milan Ivkovic - May 19, 2022

This article explores the importance of the motor drive power supply, current sensing of the drive circuits, and using ultrasound for condition-based monitoring.

Achieving precision analog to digital conversion in test and measurement applications

By Milan Ivkovic - April 8, 2022

Instrumentation systems take the raw sensor data, amplify it, condition the signals to remove unwanted artefacts, and then analog to digital converters process the data ready for digital control systems.

Analog and power management considerations for low power asset tracker design

By Milan Ivkovic - April 8, 2022

Compact, robust, battery-powered wireless asset trackers are regularly attached to shipping containers and pallets to keep customers and suppliers informed of delivery progress.

Is best in class the only consideration for your analog design?

December 10, 2019

It’s easy to seek out the absolute top of the line when it comes to a design. Whatever the “best” part is, is probably what’s going to be the most compelling for your design, right?

Designing Reliable Analog Circuits in a Less-Than-Reliable World

December 10, 2019

Analog touches everything. If not for the multitude of analog and mixed-signal components that vendors have developed in the past decades, the digital “revolution” that has made so many industry sectors leap forward would not be possible.

6 Unique Op Amp Circuits

December 10, 2019

Connectivity Among Major Analog Design Considerations in Health Wearables

December 10, 2019

Development of very low powered analog body sensors, digital microcontrollers, and innovative power and battery management circuits are driving the growth of wearable healthcare products.

Redefining nanopower for the Internet of Things

December 10, 2019

Internet of Things trends today revolve around shiny objects—whether they be artificial intelligence or blockchain—but what if one of the most revolutionary parts of the IoT is something designers consider every day in devices?

dh designs/ebv/designs/led-backlight-for-touchscreens-and-cameras-based-on-nexperia-solution LED Backlight for Touchscreens and Cameras based on Nexperia Solution