STMicroelectronics L6362A

The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment. The industrial environment could be a PLC, an IO-Link master, a relay or a valve. The L6362A is protected against reverse polarity, among VCC, GND, OUTH, OUTL and I/Q pins. Furthermore, the IC is protected against output short-circuit, overvoltage and impulse voltage.

Key features

• Supply voltage from 7 V to 36 V
• -40 °C to +125 °C operating ambient temperature
• 5 V and 3.3 V compatible I/Os
• 5 V or 3.3 V, 10 mA selectable linear regulator

Additional features

• Supply voltage from 7 V to 36 V
• 5 V and 3.3 V compatible I/Os
• 5 V or 3.3 V, 10 mA selectable linear regulator
• 0.3 A output current intervention threshold
• Fully protected
  • Reverse polarity
  • Overload with cut-off function
  • Overtemperature
  • Undervoltage and overvoltage
  • GND and VCC open wire
    
    
• -40 °C to +125 °C operating ambient temperature
• Selectable output stages: high-side, low-side, push-pull
• Suitable to drive L, C and R loads
• 30 μF output load drive capability
• Switching capability of inductors up to 500 mJ
• Wake-up detection supported
• Fast demagnetization of inductive loads
• COM1, COM2 and COM3 mode supported
• Designed to meet:
  • Burst IEC 61000-4-4
  • ESD IEC 61000-4-2
  • Surge EN60947-5-2
    
    
• Miniaturized VFDFPN 12L (3x3x0.90 mm) package

Applications

• Industrial sensors
• Factory automation
• Process control

Available tools

STEVAL-IDP003V1:

IO-Link industrial modular sensor board based on L6362A

The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes.

DATASHEET

STEVAL-IOD003V1:

IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo

The STEVAL-IOD003V1 evaluation board is based on the L6362A IO-Link PHY device with full integrated EMC protection (according to IO-Link v1.1 specification) and surge protection (according to IEC 60947-5-2).

DATASHEET

Video

IO link solution