onsemi NCP51563

The NCP51563 are isolated dual-channel gate drivers with 4.5-A/9-A source and sink peak current respectively. They are designed for fast switching to drive power MOSFETs, and SiC MOSFET power switches. The NCP51563 offers short and matched propagation delays. Two independent and 5 kVRMS (UL1577 rating) galvanically isolated gate driver channels can be used in any possible configurations of two low side, two high-side switches or a half-bridge driver with programmable dead time. An enable pin shutdown both outputs simultaneously when is set low. 

Key features

• SOIC-16 less pins 12 & 13 with 3.3 mm spacing between channels
• 4.5-A Peak source, 9-A Peak sink output current capability
• Output supply voltage from 6.5 V to 30 V with 5-V, 8-V, and 17-V UVLO threshold
• Propagation delay typical 36 ns with 8 ns max delay matching per channel

Additional features

• SOIC-16 less pins 12 & 13 with 3.3 mm spacing between channels
• 4.5-A Peak Source, 9-A Peak sink output current capability
• Output supply voltage from 6.5 V to 30 V with 5-V, 8-V, and 17-V UVLO threshold
• Propagation delay typical 36 ns with 8 ns max delay matching per channel
• User programmable input logic for single or dual-input modes via ANB
• Common mode transient Immunity CMTI > 200 V/ns
• 5 kVRMS galvanic Isolation from input to each output & 1850 V peak differential voltage between output channels
• Enable or disable pin
• User programmable dead-time

Applications

• Isolated converters in DC-DC and AC-DC power supply
• Industrial drives
• Server & Telecom power supply

Available tools

Evaluation board: NCP-NCV51563D2PAK7LGEVB 

NCP-NCV51563D2PAK7LGEVB is an evaluation board for the NCP/NCV51563. It consists of NCP51563 and 2 SiC MOSFETs in the standard D2PAK-7L package.The NCP51563 are isolated dual channel gate drivers with 4.5 A / 9 A source and sink peak current respectively.