STMicroelectronics STM32L010x4 Arm Cortex-M0+ MCU

The ultra-low-power STM32L010F4/K4 microcontrollers incorporate the high-performance Arm® Cortex®-M0+ 32-bit RISC core operating at 32 MHz, high-speed embedded memories (16 Kbytes of Flash program memory, 128 bytes of data EEPROM and 2 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals.

The STM32L010F4/K4 provide high power efficiency over a wide performance range. This is achieved with a large choice of internal and external clock sources, internal voltage adaptation, and several low-power modes.

Key features

• Ultra-low-power platform
• Core: Arm^® 32-bit Cortex^®-M0+
• Clock sources – 0 to 32 MHz external clock
• Pre-programmed bootloader – USART, SPI supported

Additional features

• Ultra-low-power platform
• 1.8 V to 3.6 V power supply
• –40 to 85 °C temperature range
• 0.23 μA Standby mode (2 wakeup pins)
• 0.29 μA Stop mode (16 wakeup lines)
• 0.54 μA Stop mode + RTC + 2-Kbyte RAM retention
• Down to 76 μA/MHz in Run mode
• 5 μs wakeup time (from Flash memory)
• 41 μA 12-bit ADC conversion at 10 ksps
• Core: Arm^® 32-bit Cortex^®-M0+
• From 32 kHz to 32 MHz
• 0.95 DMIPS/MHz
• Reset and supply management
• Ultra-low-power BOR (brownout reset) with 5 selectable thresholds
• Ultra-low-power POR/PDR
• Clock sources
• 0 to 32 MHz external clock
• 32 kHz oscillator for RTC with calibration
• High-speed internal 16 MHz factory-trimmed RC (±1%)
• Internal low-power 37 kHz RC
• Internal multispeed low-power 65 kHz to 4.2 MHz RC
• PLL for CPU clock
• Pre-programmed bootloader
• USART, SPI supported
• Development support
• Serial wire debug supported
• Up to 26 fast I/Os (23 I/Os 5-Volt tolerant)
• Memories
• 16-Kbyte Flash memory
• 2-Kbyte RAM
• 128 bytes of data EEPROM
• 20-byte backup register
• Sector protection against R/W operation
• Analog peripherals
• 12-bit ADC 1.14 Msps up to 10 channels (down to 1.8 V)
• 5-channel DMA controller, supporting ADC, SPI,
• I2C, USART and timers
• 4x peripherals communication interface
• 1x USART, 1x LPUART (low power)
• 1x SPI 16 Mbit/s
• 1x I²C (SMBus/PMBus)

Applications

• Industrial Control
• Smart trackers
• Thermostats