EBV Elektronik DB-UBLASTER2

JTAG programming USB blaster cable with CE certification for Intel FPGAs. DB-UBLASTER2 with 2.54 mm connector for standard Intel JTAG header.This device comes with housing and 1 m USB-Cable Type C / Type A. The DB-UBLASTER2 is compatible to the original Altera USB-Blaster II and uses the same software driver. It can be used with JTAG voltages from 1.8 V to 3.3 V.The Tool version can be connected directly to the standard 10pin 2.54 mm pin header on the Board without any flex cable. The DB-UBLASTER2 comes with 17 x 37 x 9 mm dimension.

Key features

• The DB-UBLASTER2 is a USB to JTAG converter
• The device is ROHS-II compliance.
• VCC(TRGT) : -0.3...5.5 V
• VCC(USB) : -0.3...5.5 V

Additional features

• DB-UBLASTER2 conforms to the following standards or other normative documents:
  • EN 55022 : 2010
  • EN 55024 : 2010
  • Following the provisions of directive 2014 / 30 / EU (EMC)
• The DB-UBLASTER2 is a USB to JTAG converter compatible to the USB-Blaster II of Intel.
  It can be used with the standard Intel Drivers to communicate between a PC (USB) and the FPGA device (JTAG)
• The device is ROHS-II compliance.
   
• V_CC(TRGT) : -0.3...5.5 V
• V_CC(USB) : -0.3...5.5 V
• Ii : -10...10 mA
• Io : -50...50 mA
• Dimension: 17 x 37 x 9 mm

Applications

• Intel FPGA JTAG programming cable.